.. |br| raw:: html
.. |prein| raw:: html
.. |preout| raw:: html
l2bd
````
eth2p-avf-dot1q-l2bdbasemaclrn-gbp-dev
''''''''''''''''''''''''''''''''''''''
**L2BD with IEEE 802.1Q and GBP test cases**
- **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology with single links between nodes.
- **[Enc] Packet Encapsulations:** Dot1q-IPv4 for L2 switching of IPv4. IEEE 802.1Q tagging is applied on both links TG-DUT1 .
- **[Cfg] DUT configuration:** DUT1 is configured with: 2 VLAN subinterfaces (VID 200 and 300), 1 L2 BD with the 2 VLAN subinterfaces and a BVI, 1 GBP L3 RD, 1 GBP L2 BD with the L2 BD, 1 GBP EPG EPG-1 with sclass 100, the GBP L2 BD and L3 RD, 2 GBP external EP in EPG-1, 2 external subnets with sclass 200 and 300, Contracts allowing full communications between the 2 external subnets. DUT1 tested with virtual with VF enabled.
- **[Ver] TG verification:** Test IPv4 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.
- **[Ref] Applicable standard specifications:** IEEE 802.1q.
.. only:: html
.. csv-table::
:header-rows: 1
:widths: auto
:align: center
:file: vpp_device_results_ubuntu_eth2p-avf-dot1q-l2bdbasemaclrn-gbp-dev.csv
.. only:: latex
.. raw:: latex
\csvautolongtable{_tmp/src/detailed_test_results/vpp_device_results_ubuntu/vpp_device_results_ubuntu_eth2p-avf-dot1q-l2bdbasemaclrn-gbp-dev.csv}
eth2p-avf-dot1qip4-l2bdbasemaclrn-dev
'''''''''''''''''''''''''''''''''''''
**IPv4 routing with IEEE 802.1Q test cases**
- **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology with single links between nodes.
- **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. IEEE 802.1Q tagging is applied on links between TG-DUT1.
- **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing and two static IPv4 /30 route entries. DUT1 is tested with virtual.
- **[Ver] TG verification:** Test IPv4 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.
- **[Ref] Applicable standard specifications:** IEEE 802.1q.
.. only:: html
.. csv-table::
:header-rows: 1
:widths: auto
:align: center
:file: vpp_device_results_ubuntu_eth2p-avf-dot1qip4-l2bdbasemaclrn-dev.csv
.. only:: latex
.. raw:: latex
\csvautolongtable{_tmp/src/detailed_test_results/vpp_device_results_ubuntu/vpp_device_results_ubuntu_eth2p-avf-dot1qip4-l2bdbasemaclrn-dev.csv}
eth2p-ethipv4-l2bdbasemaclrn-dev
''''''''''''''''''''''''''''''''
**L2 bridge-domain test cases**
- **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology with single links between nodes.
- **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. Both apply to all links.
- **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-domain switching.
- **[Ver] TG verification:** Test IPv4 packets with IP protocol=61 are sent in both directions by TG on links to DUT1; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
- **[Ref] Applicable standard specifications:** RFC792
.. only:: html
.. csv-table::
:header-rows: 1
:widths: auto
:align: center
:file: vpp_device_results_ubuntu_eth2p-ethipv4-l2bdbasemaclrn-dev.csv
.. only:: latex
.. raw:: latex
\csvautolongtable{_tmp/src/detailed_test_results/vpp_device_results_ubuntu/vpp_device_results_ubuntu_eth2p-ethipv4-l2bdbasemaclrn-dev.csv}