.. |br| raw:: html
.. |prein| raw:: html
.. |preout| raw:: html
interfaces
``````````
2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-namespace-scapy
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-namespace-scapy
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
*Tap Interface Traffic Tests*
*[Top] Network Topologies:* TG=DUT1 2-node topology with two links
between nodes.
*[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of
IPv4.
*[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG)
are set depending on test case; Namespaces (NM)
are set on DUT1 with attached linux-TAP.
*[Ver] TG verification:* Test ICMPv4 Echo Request packets
are sent by TG on link to DUT1; On receipt TG verifies packets
for correctness and their IPv4 src-addr, dst-addr, and MAC addresses.
*[Ref] Applicable standard specifications:*
.. only:: html
.. csv-table::
:header-rows: 1
:widths: auto
:align: center
:file: vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-namespace-scapy.csv
.. only:: latex
.. raw:: latex
\csvautolongtable{_tmp/src/detailed_test_results/vpp_device_results_ubuntu/vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-namespace-scapy.csv}
2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-scapy
''''''''''''''''''''''''''''''''''''''''''''''''
2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-scapy
''''''''''''''''''''''''''''''''''''''''''''''''
*Tap Interface Traffic Tests*
*[Top] Network Topologies:* TG=DUT1 2-node topology with two links
between nodes.
*[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of
IPv4.
*[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG)
are set depending on test case; Namespaces (NM)
are set on DUT1 with attached linux-TAP.
*[Ver] TG verification:* Test ICMPv4 Echo Request packets
are sent by TG on link to DUT1; On receipt TG verifies packets
for correctness and their IPv4 src-addr, dst-addr, and MAC addresses.
*[Ref] Applicable standard specifications:*
.. only:: html
.. csv-table::
:header-rows: 1
:widths: auto
:align: center
:file: vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-scapy.csv
.. only:: latex
.. raw:: latex
\csvautolongtable{_tmp/src/detailed_test_results/vpp_device_results_ubuntu/vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-scapy.csv}
2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2tap-scapy
'''''''''''''''''''''''''''''''''''''''''''''''''''''
2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2tap-scapy
'''''''''''''''''''''''''''''''''''''''''''''''''''''
*Tap Interface Traffic Tests*
*[Top] Network Topologies:* TG=DUT1 2-node topology with two links
between nodes.
*[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of
IPv4.
*[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG)
are set depending on test case; Namespaces (NM)
are set on DUT1 with attached linux-TAP.
*[Ver] TG verification:* Test IPv4 packets with IP protocol=61
are sent by TG on link to DUT1; On receipt TG verifies packets
for correctness and their IPv4 src-addr, dst-addr, and MAC addresses.
*[Ref] Applicable standard specifications:*
.. only:: html
.. csv-table::
:header-rows: 1
:widths: auto
:align: center
:file: vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2tap-scapy.csv
.. only:: latex
.. raw:: latex
\csvautolongtable{_tmp/src/detailed_test_results/vpp_device_results_ubuntu/vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2tap-scapy.csv}