.. |br| raw:: html

    <br />


.. |prein| raw:: html

    <pre>


.. |preout| raw:: html

    </pre>


ip4 tunnels
```````````

2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-scapy
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-scapy
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

*L2BD with GENEVE L3 mode test cases*
*[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with single links between nodes.
*[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4 routing over GENEVE tunnel.
*[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over GENEVE tunnel and 4 static IPv4 /24 route entries. DUT1 is tested with Intel-X710.
*[Ver] TG verification:* Test Eth-IPv4 packet is sent by TG-if1 on link to DUT1-if1; on receive by TG-if2 the encapsulated packet is verified for correctness and its outer and inner IPv4 and MAC addresses, UDP ports and GENEVE vni and protocol number. Then test Eth-IPv4-UDP-GENEVE-Eth-IPv4 packet is sent by TG-if2 on link to DUT1-if2; on receive by TG-if1 decapsulated packet is verified for correctness and its IPv4 and MAC addresses
*[Ref] Applicable standard specifications:* RFC791, RFC768, RFC8926.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-scapy.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/test_configuration/vpp_device_configuration_ubuntu/vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-scapy.csv}


2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-scapy
'''''''''''''''''''''''''''''''''''''''''''''''''

2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-scapy
'''''''''''''''''''''''''''''''''''''''''''''''''

*L2BD with VXLANoIPv4 test cases*
*[Top] Network topologies:* TG-DUT1-TG 2-node circular topology with single links between nodes.
*[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on TG-DUT.
*[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain switching combined with MAC learning enable. VXLAN tunnels are configured on links betwen TG and DUT.
*[Ver] TG verification:* Test Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 packet is sent by TG on link to DUT1; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
*[Ref] Applicable standard specifications:* RFC7348.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-scapy.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/test_configuration/vpp_device_configuration_ubuntu/vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-scapy.csv}


2n1l-10ge2p1x710-ethip4vxlan-l2xcbase-scapy
'''''''''''''''''''''''''''''''''''''''''''

2n1l-10ge2p1x710-ethip4vxlan-l2xcbase-scapy
'''''''''''''''''''''''''''''''''''''''''''

*L2XC with VXLANoIPv4 test cases*
*[Top] Network topologies:* TG-DUT1-TG 2-node circular topology with single links between nodes.
*[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on TG-DUT.
*[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect. VXLAN tunnels are configured on links betwen TG and DUT.
*[Ver] TG verification:* Test Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 packet is sent by TG on link to DUT1; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
*[Ref] Applicable standard specifications:* RFC7348.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip4vxlan-l2xcbase-scapy.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/test_configuration/vpp_device_configuration_ubuntu/vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip4vxlan-l2xcbase-scapy.csv}


lisp
''''

2n1l-10ge2p1x710-ethip4lisp-ip4base-scapy
.........................................

2n1l-10ge2p1x710-ethip4lisp-ip4base-scapy
.........................................

*ip4-lisp-ip4 encapsulation test cases*
*[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with single links between nodes.
*[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel.
*[Cfg] DUT configuration:* DUT is configured with IPv4 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and TG2.
*[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent by TG on if1 link to DUT1; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
*[Ref] Applicable standard specifications:* RFC6830.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip4lisp-ip4base-scapy.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/test_configuration/vpp_device_configuration_ubuntu/vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip4lisp-ip4base-scapy.csv}


2n1l-10ge2p1x710-ethip4lispgpe-ip4base-scapy
............................................

2n1l-10ge2p1x710-ethip4lispgpe-ip4base-scapy
............................................

*ip4-lispgpe-ip4 encapsulation test cases*
*[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with single links between nodes.
*[Enc] Packet Encapsulations:* Eth-IPv4-LISPGPE-IPv4-ICMPv4 on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel.
*[Cfg] DUT configuration:* DUT1 and TG(if2) are configured with IPv4 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and TG.
*[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in TG->DUT(if1); On receive TG(if2) verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
*[Ref] Applicable standard specifications:* RFC6830.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip4lispgpe-ip4base-scapy.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/test_configuration/vpp_device_configuration_ubuntu/vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip4lispgpe-ip4base-scapy.csv}


2n1l-10ge2p1x710-ethip4lispgpe-ip6base-scapy
............................................

2n1l-10ge2p1x710-ethip4lispgpe-ip6base-scapy
............................................

*ip4-lispgpe-ip6 encapsulation test cases*
*[Top] Network Topologies:* TG(if1)-DUT1-TG(if2) 2-node circular topology with single links between nodes.
*[Enc] Packet Encapsulations:* Eth-IPv4-LISPGPE-IPv6-ICMPv6 on DUT1-TG(if2),Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.
*[Cfg] DUT configuration:* DUT1 and TG(if2) are configured with IPv6 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and TG(if2).
*[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in if1 by TG on links to DUT1; on receive TG verifies packets for correctness and their IPv6 src-addr, dst-addr and MAC addresses.
*[Ref] Applicable standard specifications:* RFC6830.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip4lispgpe-ip6base-scapy.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/test_configuration/vpp_device_configuration_ubuntu/vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip4lispgpe-ip6base-scapy.csv}