.. |br| raw:: html

    <br />


.. |prein| raw:: html

    <pre>


.. |preout| raw:: html

    </pre>


srv6
````

2n1l-10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-scapy
''''''''''''''''''''''''''''''''''''''''''''''''''''

2n1l-10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-scapy
''''''''''''''''''''''''''''''''''''''''''''''''''''

*Segment routing over IPv6 dataplane with one SID (SRH not inserted) test suite.*
*[Top] Network topologies:* TG-DUT1 2-node topology with one link between nodes.
*[Cfg] DUT configuration:* On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with one SID - Segment Routing Header not inserted.
*[Ver] TG verification:* ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG.
*[Ref] Applicable standard specifications:* SRv6 Network Programming - draft 3.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-scapy.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/test_configuration/vpp_device_configuration_ubuntu/vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-scapy.csv}


2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-scapy
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-scapy
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

*Segment routing over IPv6 dataplane with two SIDs (SRH inserted) test suite.*
*[Top] Network topologies:* TG-DUT1 2-node topology with one link between nodes.
*[Cfg] DUT configuration:* On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with two SIDs - Segment Routing Header inserted.
*[Ver] TG verification:* ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG.
*[Ref] Applicable standard specifications:* SRv6 Network Programming - draft 3.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-scapy.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/test_configuration/vpp_device_configuration_ubuntu/vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-scapy.csv}


2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy
''''''''''''''''''''''''''''''''''''''''''''''''''''''''

2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy
''''''''''''''''''''''''''''''''''''''''''''''''''''''''

*Segment routing over IPv6 dataplane with two SIDs (SRH inserted) test suite.*
*[Top] Network topologies:* TG-DUT1 2-node topology with one link between nodes.
*[Cfg] DUT configuration:* On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with two SIDs - Segment Routing Header inserted.
*[Ver] TG verification:* ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG.
*[Ref] Applicable standard specifications:* SRv6 Network Programming - draft 3.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/test_configuration/vpp_device_configuration_ubuntu/vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy.csv}


2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-scapy
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''

2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-scapy
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''

*Segment routing over IPv6 dataplane with Dynamic SRv6 proxy test suite.*
*[Top] Network topologies:* TG-DUT1 2-node topology with one link between nodes.
*[Cfg] DUT configuration:* On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with three SIDs - Segment Routing Header inserted.
*[Ver] TG verification:* ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG.
*[Ref] Applicable standard specifications:* SRv6 Network Programming - draft 3.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-scapy.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/test_configuration/vpp_device_configuration_ubuntu/vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-scapy.csv}


2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-scapy
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-scapy
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

*Segment routing over IPv6 dataplane with Masquerading SRv6 proxy test cases*
*[Top] Network topologies:* TG-DUT1 2-node topology with one link between nodes.
*[Cfg] DUT configuration:* On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with three SIDs - Segment Routing Header inserted.
*[Ver] TG verification:* ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG.
*[Ref] Applicable standard specifications:* SRv6 Network Programming - draft 3.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-scapy.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/test_configuration/vpp_device_configuration_ubuntu/vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-scapy.csv}


2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-scapy
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-scapy
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

*Segment routing over IPv6 dataplane with Static SRv6 proxy test cases.*
*[Top] Network topologies:* TG-DUT1 2-node topology with one link between nodes.
*[Cfg] DUT configuration:* On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with three SIDs - Segment Routing Header inserted.
*[Ver] TG verification:* ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG.
*[Ref] Applicable standard specifications:* SRv6 Network Programming - draft 3.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-scapy.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/test_configuration/vpp_device_configuration_ubuntu/vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-scapy.csv}