.. |br| raw:: html
.. |prein| raw:: html
.. |preout| raw:: html
srv6
````
2n1l-10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-scapy
''''''''''''''''''''''''''''''''''''''''''''''''''''
2n1l-10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-scapy
''''''''''''''''''''''''''''''''''''''''''''''''''''
**Segment routing over IPv6 dataplane with one SID (SRH not inserted) test suite.**
- **[Top] Network topologies:** TG-DUT1 2-node topology with one link between nodes.
- **[Cfg] DUT configuration:** On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with one SID - Segment Routing Header not inserted.
- **[Ver] TG verification:** ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG.
- **[Ref] Applicable standard specifications:** SRv6 Network Programming - draft 3.
.. only:: html
.. csv-table::
:header-rows: 1
:widths: auto
:align: center
:file: vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-scapy.csv
.. only:: latex
.. raw:: latex
\csvautolongtable{_tmp/src/test_configuration/vpp_device_configuration_ubuntu/vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-scapy.csv}
2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-scapy
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-scapy
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
**Segment routing over IPv6 dataplane with two SIDs (SRH inserted) test suite.**
- **[Top] Network topologies:** TG-DUT1 2-node topology with one link between nodes.
- **[Cfg] DUT configuration:** On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with two SIDs - Segment Routing Header inserted.
- **[Ver] TG verification:** ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG.
- **[Ref] Applicable standard specifications:** SRv6 Network Programming - draft 3.
.. only:: html
.. csv-table::
:header-rows: 1
:widths: auto
:align: center
:file: vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-scapy.csv
.. only:: latex
.. raw:: latex
\csvautolongtable{_tmp/src/test_configuration/vpp_device_configuration_ubuntu/vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-scapy.csv}
2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy
''''''''''''''''''''''''''''''''''''''''''''''''''''''''
2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy
''''''''''''''''''''''''''''''''''''''''''''''''''''''''
**Segment routing over IPv6 dataplane with two SIDs (SRH inserted) test suite.**
- **[Top] Network topologies:** TG-DUT1 2-node topology with one link between nodes.
- **[Cfg] DUT configuration:** On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with two SIDs - Segment Routing Header inserted.
- **[Ver] TG verification:** ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG.
- **[Ref] Applicable standard specifications:** SRv6 Network Programming - draft 3.
.. only:: html
.. csv-table::
:header-rows: 1
:widths: auto
:align: center
:file: vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy.csv
.. only:: latex
.. raw:: latex
\csvautolongtable{_tmp/src/test_configuration/vpp_device_configuration_ubuntu/vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy.csv}
2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-scapy
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''
2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-scapy
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''
**Segment routing over IPv6 dataplane with Dynamic SRv6 proxy test suite.**
- **[Top] Network topologies:** TG-DUT1 2-node topology with one link between nodes.
- **[Cfg] DUT configuration:** On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with three SIDs - Segment Routing Header inserted.
- **[Ver] TG verification:** ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG.
- **[Ref] Applicable standard specifications:** SRv6 Network Programming - draft 3.
.. only:: html
.. csv-table::
:header-rows: 1
:widths: auto
:align: center
:file: vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-scapy.csv
.. only:: latex
.. raw:: latex
\csvautolongtable{_tmp/src/test_configuration/vpp_device_configuration_ubuntu/vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-scapy.csv}
2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-scapy
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-scapy
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
**Segment routing over IPv6 dataplane with Masquerading SRv6 proxy test cases**
- **[Top] Network topologies:** TG-DUT1 2-node topology with one link between nodes.
- **[Cfg] DUT configuration:** On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with three SIDs - Segment Routing Header inserted.
- **[Ver] TG verification:** ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG.
- **[Ref] Applicable standard specifications:** SRv6 Network Programming - draft 3.
.. only:: html
.. csv-table::
:header-rows: 1
:widths: auto
:align: center
:file: vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-scapy.csv
.. only:: latex
.. raw:: latex
\csvautolongtable{_tmp/src/test_configuration/vpp_device_configuration_ubuntu/vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-scapy.csv}
2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-scapy
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-scapy
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
**Segment routing over IPv6 dataplane with Static SRv6 proxy test cases.**
- **[Top] Network topologies:** TG-DUT1 2-node topology with one link between nodes.
- **[Cfg] DUT configuration:** On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with three SIDs - Segment Routing Header inserted.
- **[Ver] TG verification:** ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG.
- **[Ref] Applicable standard specifications:** SRv6 Network Programming - draft 3.
.. only:: html
.. csv-table::
:header-rows: 1
:widths: auto
:align: center
:file: vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-scapy.csv
.. only:: latex
.. raw:: latex
\csvautolongtable{_tmp/src/test_configuration/vpp_device_configuration_ubuntu/vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-scapy.csv}